A Science-based mixed oxide property model for developing advanced oxide nuclear fuels

Kato, Masato; Oki, Takumi; Watanabe, Masashi; Hirooka, Shun; Vauchy, R.; Ozawa, Takayuki; Uwaba, Tomoyuki; Ikusawa, Yoshihisa; Nakamura, Hiroki; Machida, Masahiko

Journal of the American Ceramic Society, 107(5), p.2998 - 3011, 2024/05

https://doi.org/10.1111/jace.19609

Thermal conductivity measurement of uranium-plutonium mixed oxide doped with Nd/Sm as simulated fission products

Horii, Yuta; Hirooka, Shun; Uno, Hiroki*; Ogasawara, Masahiro*; Tamura, Tetsuya*; Yamada, Tadahisa*; Furusawa, Naoya*; Murakami, Tatsutoshi; Kato, Masato

Journal of Nuclear Materials, 588, p.154799_1 - 154799_20, 2024/01

https://doi.org/10.1016/j.jnucmat.2023.154799

The thermal conductivities of near-stoichiometric (U,Pu,Am)O doped with NdO/SmO, which is major fission product (FP) generated by a uranium-plutonium mixed oxides (MOX) fuel irradiation, as simulated fission products are evaluated at 1073-1673 K. The thermal conductivities are calculated from the thermal diffusivities that are measured using the laser flash method. To evaluate the thermal conductivity from a homogeneity viewpoint of Nd/Sm cations in MOX, the specimens with different homogeneity of Nd/Sm are prepared using two kinds of powder made by ball-mill and fusion methods. A homogeneous Nd/Sm distribution decreases the thermal conductivity of MOX with increasing Nd/Sm content, whereas heterogeneous Nd/Sm has no influence. The effect of Nd/Sm on the thermal conductivity is studied using the classical phonon transport model (A+BT). The dependences of the coefficients A and B on the Nd/Sm content (C and C, respectively) are evaluated as: A(mK/W)=1.70 10 + 0.93C + 1.20C, B(m/W)=2.39 10.

Comparative study of a glovebox dismantling facility for manual and remote glovebox dismantlement activities

Kitamura, Akihiro; Hirano, Hiroshi*; Yoshida, Masato

Nuclear Engineering and Design, 411, p.112435_1 - 112435_14, 2023/09

https://doi.org/10.1016/j.nucengdes.2023.112435

This study presents the features and brief history of the glovebox dismantling facility and the primary dismantlement results. Subsequently, we evaluate the novelties of the facility from operational experiences in manual and remote glovebox dismantlement methods and discuss their characteristics. Furthermore, we evaluate the worker exposure dose based on the obtained data. Finally, we show how these experiences are effectively fed back to the technological dismantlement development for our decommissioning project.

Toward long-term storage of nuclear materials in MOX fuels fabrication facility

Hirooka, Shun; Nakamichi, Shinya; Matsumoto, Taku; Tsuchimochi, Ryota; Murakami, Tatsutoshi

Frontiers in Nuclear Engineering (Internet), 2, p.1119567_1 - 1119567_7, 2023/03

https://doi.org/10.3389/fnuen.2023.1119567

Storage of plutonium (Pu)-containing materials requires extremely strict attention in terms of physical safety and material accounting. Despite the emphasized importance of storage management, only a few reports are available in the public, e.g., experience in PuO storage in the UK and safety standards in the storage of Pu-containing materials in the US. Japan also stores more U-Pu mixed oxide (MOX) mostly in powder form. Adopting an appropriate storage management is necessary depending on the characteristics of MOX items such as raw powder obtained by reprocessing of spent Light Water Reactor fuels, research and development on the remains of fuel fabrication, which can contain organic materials, and dry-recycled powder during fuel fabrication. Stagnation in fuel fabrications and experience in degradation of MOX containers during extended period of storage have led to the review of the storage method in the Plutonium Fuel Development Center in Japan Atomic Energy Agency. The present work discusses the various nuclear materials, storage methods, experience in degradation of containers that occur during storage, and strategies for future long-term storage.

Decommissioning of the Plutonium Research Building No.1 (Plan and Present Status)

Komuro, Michiyasu; Kanazawa, Hiroyuki; Kokusen, Junya; Shimizu, Osamu; Honda, Junichi; Harada, Katsuya; Otobe, Haruyoshi; Nakada, Masami; Inagawa, Jun

JAEA-Technology 2021-042, 197 Pages, 2022/03

JAEA-Technology-2021-042.pdf:16.87MB

Plutonium Research Building No.1 was constructed in 1960 for the purpose of establishing plutonium handling technology and studying its basic physical properties. Radiochemical research, physicochemical research and analytical chemistry regarding solutions and solid plutonium compounds had been doing for the research program in Japan Atomic Energy Agency (JAEA). In 1964, the laboratory building was expanded and started the researching plutonium-uranium mixed fuel and reprocessing of plutonium-based fuel, playing an advanced role in plutonium-related research in Japan. Since then, the research target has been expanded to include transplutonium elements, and it has functioned as a basic research facility for actinides. The laboratory is constructed by concrete structure and it has the second floor, equipped with 15 glove boxes and 4 chemical hoods. Plutonium Research Building No.1 was decided as one of the facilities to be decommissioned by Japan Atomic Energy Agency Reform Plan in September 2014. So far, the contamination survey of the radioactive materials in the controlled area, the decontamination of glove boxes, and the consideration of the equipment dismantling procedure have been performed as planned. The radioisotope and nuclear fuel materials used in the facility have been transfer to the other facilities in JAEA. The decommissioning of the facility is proceeding with the goal of completing by decommissioning the radiation controlled area in 2026. In this report, the details of the decommissioning plan and the past achievements are reported with the several data.

Basis for handling of nuclear fuel materials (Second edition)

Task Force on Writing Textbook of Nuclear Fuel Materials

JAEA-Review 2020-007, 165 Pages, 2020/07

JAEA-Review-2020-007.pdf:6.63MB

The present textbook was written by Task Force on Writing Textbook of Nuclear Fuel Materials at the Nuclear Science Research Institute in order to improve technological abilities of engineers and researchers who handle nuclear fuel materials. The taskforce consists of young and middle class engineers each having certification for chief engineer of nuclear fuel. The present textbook mainly deals with uranium and plutonium, and shows their nuclear properties, physical and chemical properties, and radiation effects on materials and human body. It also presents basic matters for safety handling of nuclear fuel materials, such as handling of nuclear fuel materials with hood and glovebox, important points in storage and transportation of nuclear fuel materials, radioactive waste management, radiation safety management, and emergency management. Furthermore, incident cases at domestic and foreign nuclear fuel materials facilities are compiled to learn from the past.

Study on plutonium burner high temperature gas-cooled reactor in Japan; Introduction scenario, reactor safety and fabrication tests of the 3S-TRISO fuel

Ueta, Shohei; Mizuta, Naoki; Fukaya, Yuji; Goto, Minoru; Tachibana, Yukio; Honda, Masaki*; Saiki, Yohei*; Takahashi, Masashi*; Ohira, Koichi*; Nakano, Masaaki*; et al.

Nuclear Engineering and Design, 357, p.110419_1 - 110419_10, 2020/02

https://doi.org/10.1016/j.nucengdes.2019.110419

The concept of a plutonium (Pu) burner HTGR is proposed to incarnate highly-effective Pu utilization by its inherent safety features. The security and safety fuel (3S-TRISO fuel) employs the coated fuel particle with a fuel kernel made of plutonium dioxide (PuO) and yttria stabilized zirconia (YSZ) as an inert matrix. This paper presents feasibility study of Pu burner HTGR and R&D on the 3S-TRISO fuel.

Technical design of the pressure-resistant chamber for open inspections of the storage containers of nuclear fuel materials

Marufuji, Takato; Sato, Takumi; Ito, Hideaki; Suzuki, Hisashi; Fujishima, Tadatsune; Nakano, Tomoyuki

JAEA-Technology 2019-006, 22 Pages, 2019/05

JAEA-Technology-2019-006.pdf:2.84MB

Radioactive contamination incident occurred at Plutonium Fuel Research Facility (PFRF) in Oarai Research and Development Institute, Japan Atomic Energy Agency on June 6, 2017. During inspection work of storage container containing nuclear fuel materials, the PVC bag packaging in the storage container ruptured when a worker opened the lid in the hood, and a part of contents was spattered over the room. The cause of the increase of internal pressure of the storage container was gas generation by alpha radiolysis of the epoxy resin mixed with nuclear fuel materials. Opening inspection of about 70 similar containers stored in PFRF has been planned to confirm the condition of the contents and to stabilize the stored materials containing organic compounds. For safe and reliable open inspection of the storage containers with high internal pressure in the glove box, it is necessary to develop a pressure-resistant chamber in which the storage containers are opened and the contents are inspected under gastight condition. This report summarizes the concerns and countermeasures of the chamber design and the design results of the chamber.

Activity median aerodynamic diameter relating to contamination at Plutonium Fuel Research Facility in Oarai Research and Development Center; Particle size analysis for plutonium particles using imaging plate

Takasaki, Koji; Yasumune, Takashi; Hashimoto, Makoto; Maeda, Koji; Kato, Masato; Yoshizawa, Michio; Momose, Takumaro

JAEA-Review 2019-003, 48 Pages, 2019/03

JAEA-Review-2019-003.pdf:3.81MB

June 6, 2017, at Plutonium Fuel Research Facility in Oarai Research and Development Center of JAEA, when five workers were inspecting storage containers containing plutonium and uranium, resin bags in a storage container ruptured, and radioactive dust spread. Though they were wearing a half face mask respirator, they inhaled radioactive materials. In the evaluation of the internal exposure dose, the aerodynamic radioactive median diameter (AMAD) is an important parameter. We measured 14 smear samples and a dust filter paper with imaging plates, and estimated the AMAD by image analysis. As a result of estimating the AMAD, from the 14 smear samples, the AMADs are 4.3 to 11 m or more in the case of nitrate plutonium, and the AMADs are 5.6 to 14 m or more in the case of the oxidized plutonium. Also, from the dust filter paper, the AMAD is 3.0 m or more in the case of nitrate plutonium, and the AMAD is 3.9 m or more in the case of the oxidized plutonium.

Study on Pu-burner high temperature gas-cooled reactor in Japan; Design study of fuel and reactor core

Goto, Minoru; Aihara, Jun; Inaba, Yoshitomo; Ueta, Shohei; Fukaya, Yuji; Okamoto, Koji*

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 6 Pages, 2018/10

JAEA has conducted design studies of a Pu-burner HTGR. The Pu-burner HTGR incinerates Pu by fission, and hence a high burn-up is required for the efficient incineration. In the fuel design, a thin ZrC layer, which acts as an oxygen getter and suppresses the internal pressure, was coated on the fuel kernel to prevent the CFP failure at the high burn-up. A stress analysis of the SiC layer, which acts as a pressure vessel for the CFP, was performed for with consideration of the depression effect due to the ZrC layer. As a result, the CFP failure fraction at high burn-up of 500 GWd/t satisfied the target value. In the reactor core design, an axial fuel shuffling was employed to attain the high burn-up, and the nuclear burn-up calculations with the whole core model and the fuel temperature calculations were performed. As a result, the nuclear characteristics, which are the shutdown margin and the temperature coefficient of reactivity, and the fuel temperature satisfied their target values.